Steps

1. Place the ribbon in the work area. Cut off the wire to the desired length before continuing.

2. Make a loop. Slip back from the top of the tape with a loop and two to three times until you reach the bottom of the tape. The amount of loop depends on how much you want the finished product.

3. Cut off the rest of the tape. Use diagonal cutting to prevent further strip removal.

4. Place the wire over the center of the loops. Tighten tightly to hold the loops firmly in place.

5. Done.

 

Tips

When several of these are joined together, they create the impression of a very large bow. This can be attached to the side of a basket or similar object, for display or used for gifts.


Things You'll Need

Florist wire
3 meters of ribbon